The hanger type flow channel is analyzed and designed according to the characteristics of the raw materials (viscosity, temperature, rate); the ribs finish of the mold cavity is 0.01um-0.06um; the surface finish of the melt flow is 0.03um-0.04um; the heating is carried out inside the heating rod or outside the heating plate , Hot oil circulation temperature control. Suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.

Technical characteristics

Conventional die head model 1.1M-1.6M, can also be customized according to customer's special requirements

The diameter of the melt-blowing head (spinneret) is 0.2mm-0.3mm. Spinning hole distance between 0.7mm-0.8mm

Suitable for process temperature below 350, carbon fiber 330-350, PP, PET300 below

Suitable for output generally 30-50KG / hour, special requirements below 80KG / hour, can also be determined according to the production line configuration capacity